Best ARK Server Settings

  • 9 min read
  • Updated 12 September 2026
  • ESAGAMES Team

The settings that make an ARK server fun without breaking it — sensible harvest, taming and XP rates, the right difficulty, and breeding multipliers that don't need night shifts. Where each one lives (GameUserSettings.ini vs Game.ini), and how to keep the server smooth. Works for ARK: Survival Ascended and Survival Evolved.

ARK's config is split across two files: GameUserSettings.ini holds the rates and options you change first (harvest, taming, XP, difficulty, server identity), and Game.ini holds the advanced per-stat and breeding multipliers. Always stop the server before editing, or it overwrites your changes on shutdown.

Below are balanced starting values for a casual-to-moderate PvE/PvP server, plus what each does — tune from there to taste.

You can change every one of these rates from the panel on ARK server hosting, with a file manager for GameUserSettings.ini and Game.ini.

What you'll need

  • Access to your server's config files (a panel File Manager or SFTP).
  • The two files: GameUserSettings.ini and Game.ini.
  • The ability to stop the server before editing (or edits get overwritten).
  • Admin access to run DestroyWildDinos after difficulty changes.
  • A strong CPU and plenty of RAM for a busy server.

Dial in your ARK server, setting by setting

  1. Step 1: Know the two config files

    Rates and common options go in ShooterGame/Saved/Config/<platform>/GameUserSettings.ini under [ServerSettings]. Advanced multipliers (breeding, per-stat) go in Game.ini under [/script/shootergame.shootergamemode]. Stop the server before editing either.

  2. Step 2: Set harvest, taming and XP rates

    These are the first thing players feel. Moderate values keep progression rewarding without trivialising it — 2-3x is a comfortable casual pace; 1x is vanilla; 5x+ is fast/boosted.

    [ServerSettings]
    HarvestAmountMultiplier=3.0
    TamingSpeedMultiplier=3.0
    XPMultiplier=2.0
    HarvestHealthMultiplier=1.0
  3. Step 3: Set the difficulty

    Difficulty controls wild creature levels. OverrideOfficialDifficulty=5.0 lets common creatures spawn up to level 150 (30 level steps of 5); a few, such as the Wyvern and Rock Drake, go up to 190. Once the override is set, DifficultyOffset is ignored, so you don't need to tune both. Then run admincheat DestroyWildDinos once so the map repopulates at the new levels.

    [ServerSettings]
    OverrideOfficialDifficulty=5.0
  4. Step 4: Tune breeding in Game.ini

    Breeding is the biggest time-sink. In Game.ini raise maturation and cut the imprint interval so raising creatures doesn't need overnight babysitting.

    [/script/shootergame.shootergamemode]
    BabyMatureSpeedMultiplier=5.0
    EggHatchSpeedMultiplier=5.0
    BabyCuddleIntervalMultiplier=0.4
    MatingIntervalMultiplier=0.5
  5. Step 5: Set stacks, weight & quality-of-life

    A few QoL options hugely reduce grind: bigger item stacks, faster crafting and a shorter corpse/loot decay. These live in GameUserSettings.ini and/or Game.ini depending on the option.

    ItemStackSizeMultiplier=3.0
    AllowFlyerCarryPvE=true
    ShowMapPlayerLocation=true
  6. Step 6: Keep it stable & performant

    ARK is heavy. Keep AutoSavePeriodMinutes at or near its default of 15: shorter intervals can hurt performance, and admincheat SaveWorld saves on demand. MaxTamedDinos is a global cap on tames (default 5000), so lower it if tames pile up on a struggling map. Give the server a strong CPU and plenty of RAM.

    [ServerSettings]
    AutoSavePeriodMinutes=15
    MaxTamedDinos=5000

Balanced, stable and fun

  • 2-3x is the sweet spot

    For most communities, harvest/taming around 3x and XP around 2x keeps progression rewarding without making tames and levels feel meaningless.

  • Fix breeding, not just rates

    The complaint that drives players off ARK is overnight imprint babysitting. Raise BabyMatureSpeed and lower BabyCuddleInterval so raising is possible in a normal session.

  • DestroyWildDinos after difficulty

    Difficulty changes only apply to newly-spawned creatures. Run DestroyWildDinos once so the whole map repopulates at your new max level.

  • It's CPU- and RAM-hungry

    ARK (especially ASA) is one of the heaviest survival games. A high-clock CPU, plenty of RAM and scheduled restarts keep a busy server smooth.

Common problems & fixes

My changes keep disappearing

You edited while the server was running. Stop it first, edit GameUserSettings.ini / Game.ini, save, then start it — the server writes the file on shutdown and overwrites you.

Difficulty changed but dinos are still low level

Difficulty only affects new spawns. Run the admin command DestroyWildDinos once so the map repopulates at the new levels.

A setting has no effect

It's in the wrong file or section. Rates go in GameUserSettings.ini [ServerSettings]; breeding/per-stat go in Game.ini [/script/shootergame.shootergamemode]. Check spelling exactly.

The server lags or crashes when busy

ARK is heavy. Cap wild/tamed dino counts, schedule restarts to clear memory, and give it a stronger CPU and more RAM.

Frequently asked questions

Which file do ARK server settings go in?

Rates and common options go in GameUserSettings.ini under [ServerSettings]. Advanced multipliers like breeding and per-stat tweaks go in Game.ini. Always stop the server before editing.

What are good taming and harvest rates?

For a balanced casual server, 3x harvest and 3x taming with 2x XP is a comfortable pace. 1x is vanilla (slow); 5x and up is fast/boosted. Tune to your community.

How do I make wild dinos higher level?

Set OverrideOfficialDifficulty=5.0 in GameUserSettings.ini [ServerSettings]: common creatures then spawn up to level 150. DifficultyOffset is ignored while the override is set. Then run admincheat DestroyWildDinos once so the map repopulates.

How do I make breeding less painful?

In Game.ini raise BabyMatureSpeedMultiplier and EggHatchSpeedMultiplier, and lower BabyCuddleIntervalMultiplier so imprinting doesn't need overnight sessions.

Do these settings work for both ASA and ASE?

The rate, difficulty and breeding multipliers here have the same names in ARK: Survival Ascended and Survival Evolved. Some server options differ: in ASA the MaxPlayers ini setting is replaced by the -WinLiveMaxPlayers launch argument, and mods are loaded with -mods= and CurseForge project IDs.

Why do my settings keep resetting?

You edited the config while the server was running — it overwrites the file on shutdown. Always stop the server first, edit, save, then start it back up.

Fixes for when it goes wrong

Knowledge-base fixes that pair with this guide — the errors people hit after setup.

More guides

Skip the troubleshooting

Managed, protected hosting in Frankfurt — we handle the Linux, the network and the DDoS so you don't have to.