A host migration fails in one of three ways: the copy was taken while the server was still writing, the new server runs a different build, or the old server was cancelled before anyone checked the new one. This guide is the procedure that avoids all three, followed by the exact files and the one trap that matters for Minecraft, Rust, ARK, FiveM, Palworld and Valheim.
Every game server is the same three things: a save (world, map or database), configuration (files plus launch parameters) and a build (game version, mod loader, mods). Move the first two, reproduce the third exactly, and the new host loads the world as if nothing happened. What differs between games is where the save lives and which setting silently makes the server ignore it and generate a fresh world instead — that is what the per-game sections below are for.
Jump to your game: Minecraft · Rust · ARK · FiveM · Palworld · Valheim. Moving to ESAGAMES? Our game server hosting gives you SFTP and a file manager, and support will help with the move.
What you'll need
- SFTP or file-manager access to the old server, and database access if the game uses one (FiveM).
- The exact game build, mod loader or framework and mod list you run today.
- The new server installed on that same build, started once and stopped.
- Disk space for one compressed archive of the server on both hosts.
- Access to your DNS zone if players connect through a domain, and a quiet maintenance window.
The migration procedure, step by step
Step 1: Write down the build and the launch settings
Before you stop anything, record what the new server has to reproduce: the exact game version, the mod loader or framework and every mod or plugin with its version, the ports, and the launch parameters. Many settings that decide which save gets loaded are startup parameters in the panel, not files — a Rust identity, a Valheim world name, an ARK cluster ID. Screenshot the startup page; it is not in your backup.
game version / build: mod loader or framework + version: mods / plugins (name + version): launch parameters (world, identity, seed, cluster id): ports: save location (see your game below):Step 2: Prepare the new server and lower the DNS TTL
Install the same build on the new host, start it once so it creates its folders, then stop it. If players connect through a domain, lower the TTL of that DNS record (for example to 300 seconds) at least one old-TTL period before migration day, so the switch later reaches players in minutes instead of hours. Announce a maintenance window.
Step 3: Stop the old server and make one archive
Stop the server with its normal stop command or the panel, so it writes a final save and nothing changes while you copy. Pack the save, configs and mods into a single archive: thousands of small files transfer far slower over SFTP than one file, and one file gives you a checksum to verify. Download a copy to your own computer — that copy is your rollback.
tar -czf migration.tar.gz <save folder> <config files> <mods folder> sha256sum migration.tar.gz > migration.sha256Step 4: Transfer, verify and extract on the new host
Upload the archive and its checksum to the new server, check that the checksum matches, and only then extract it over the fresh default files while the new server is stopped. A mismatch means a broken transfer: upload again rather than extracting a damaged archive.
sha256sum -c migration.sha256 tar -xzf migration.tar.gzStep 5: Re-apply everything that is not in the files
Set the launch parameters, ports and RAM you recorded in step 1, plus anything tied to the old machine: database connection strings, license keys and hostnames. Start the server and read the console from the first line. Messages about generating or creating a new world mean it did not find your save — stop it at once, before that new world is saved over the name, and check the path for your game below.
Step 6: Verify before any player joins
Check the things players would notice: the world with recent builds, one known player's inventory or character, admin permissions, and that every mod or plugin loaded. Then make a change, restart the server and confirm the change survived — that proves the new host writes saves where it reads them.
[ ] recent builds / bases present [ ] a known player's inventory or character [ ] admins and permissions work [ ] all mods / plugins loaded, no console errors [ ] a change survives a restartStep 7: Cut over the address
Point the DNS record at the new IP (and port, for a Minecraft SRV record), or publish the new IP:port if players connect directly. Update your Discord, website and server-list entries. Leave the old server stopped but untouched.
Step 8: Keep a rollback until the new host has proven itself
If something serious shows up, start the untouched old server and point DNS back — with the low TTL that takes minutes. Progress made on the new host in the meantime is lost unless you copy it back, so decide within hours, not days. Cancel the old service only after several days of normal play, with the archive stored somewhere that is neither host.
What is different for each game
Minecraft (Java)
Move: the world folder named by
level-namein server.properties (defaultworld/); on Paper, Spigot or Bukkit before 26.1 alsoworld_nether/andworld_the_end/. Plusserver.properties,ops.json,whitelist.json,banned-players.json,banned-ips.json, andplugins/with bukkit.yml, spigot.yml andconfig/on Paper, ormods/andconfig/on Fabric/Forge.
Trap: keeponline-modeunchanged. Offline players get a UUID derived from their name, and player data is stored per UUID, so flipping it makes every inventory look empty. Never load a world on an older Minecraft version than it was saved with. 26.1 restructured the world folder, so copy it whole instead of picking subfolders.
Address: Java players on a domain follow the_minecraft._tcpSRV record; Bedrock does not read SRV.
Minecraft server hostingRust
Move: the whole
server/<identity>/folder: the map.savand.map,player.blueprints.*.dband the other player databases, andcfg/(server.cfg, users.cfg with owners and moderators, bans.cfg). Plusoxide/orcarbon/with plugins, config, data and lang.
Trap: the save is namedproceduralmap.<size>.<seed>.<protocol>.sav. The new server needs the same+server.identity,server.seedandserver.worldsize(or the sameserver.levelurlfor a custom map), or it quietly generates a fresh map. The protocol must match too, so a mid-wipe move has to happen before the monthly forced wipe on the first Thursday.
Easiest: move on wipe day and carry only cfg, plugins and, if you keep them, blueprints.
Rust server hostingARK: Survival Ascended & Evolved
Move:
ShooterGame/Saved/SavedArks/with the map.ark, player.arkprofileand tribe.arktribefiles (ASA keeps them in a per-map subfolder such asTheIsland_WP/), plusGameUserSettings.iniandGame.inifromShooterGame/Saved/Config/WindowsServer/orLinuxServer/.
Trap: ASA (server app 2430930) and ASE (376030) saves are not interchangeable. Load the same mods in the same order:ActiveModsin GameUserSettings.ini, or-mods=with CurseForge project IDs on ASA.
Clusters: copy the cluster folder too (defaultShooterGame/Saved/clusters/, or wherever-ClusterDirOverridepoints) and start every map with the same-clusterid. Without it, uploaded characters, dinos and items are gone.
ARK server hostingFiveM
Move: three separate things. The server-data folder (
server.cfgandresources/); the MySQL/MariaDB database, exported with mysqldump, which holds every ESX or QBCore character, bank balance and inventory; and thetxData/folder with txAdmin's admins, profile settings and its own player and ban records. By default txData sits in the parent folder of the artifacts on Windows, and besiderun.shon Linux.
Trap: after importing the dump, pointset mysql_connection_string "mysql://user:password@host:3306/database"at the new database (useset, neversetr, which sends the password to clients). A string still aimed at the old host looks fine until the old host is cancelled.
Also: run the same FXServer artifact build, open yoursv_licenseKeyin the Cfx.re Portal and update it if it is tied to the old IP, and open port 30120 TCP and UDP.
FiveM server hostingPalworld
Move: the world folder
Pal/Saved/SaveGames/0/<world ID>/in full (Level.sav,LevelMeta.sav, thePlayers/folder andWorldOption.savif present), plusPalWorldSettings.inifromPal/Saved/Config/LinuxServer/orWindowsServer/.
Trap: do not copyGameUserSettings.ini. Instead setDedicatedServerName=in the new server's own file to the uploaded folder's ID, character for character. If it does not match, the server does not error; it creates a brand-new world.
Settings ignored? AWorldOption.savinside the world folder takes priority over PalWorldSettings.ini, so edit or remove it rather than the ini.
Palworld server hostingValheim
Move: from
worlds_local/in the save directory (~/.config/unity3d/IronGate/Valheim/on Linux,%USERPROFILE%\AppData\LocalLow\IronGate\Valheim\on Windows, or your-savedirpath): since Valheim 1.0 (9 September 2026) each world is a folder named after the world, and you copy the whole folder; older builds use the<world>.db+<world>.fwlpair, and you need both. Alsoadminlist.txt,permittedlist.txtandbannedlist.txt, which sit beside worlds_local, not inside it. Modded:BepInEx/pluginsandBepInEx/config.
Trap: a 1.0 server converts an older world on first load and takes a backup first. Let it finish, and check every BepInEx mod has a 1.0-compatible release. Keep the same-world,-passwordand-crossplayflags.
Characters are stored on each player's PC, so nothing to move for them.
Valheim server hosting
Common problems & fixes
The server started with a brand-new world
It did not find your save. Stop it before it saves, then check the name or path setting for your game: level-name (Minecraft), identity, seed and world size (Rust), DedicatedServerName (Palworld), -world (Valheim), or map and mods (ARK).
The world is there but player inventories or characters are empty
Minecraft: online-mode was changed, so player UUIDs no longer match. Palworld: the Players folder was not copied. FiveM: the database was not imported or mysql_connection_string still points at the old one.
Mods or plugins fail to load after the move
The build differs. Match the game version, the mod loader or framework (Paper vs Fabric, Oxide vs Carbon, the FXServer artifact) and each mod version, then update deliberately once the server is stable.
Players cannot connect to the new server
Check the ports are open on the new host: Minecraft 25565 TCP, Rust 28015 UDP, ARK 7777 UDP (ASE also 7778 UDP and the 27015 query port), FiveM 30120 TCP and UDP, Palworld 8211, Valheim 2456-2457 UDP. If they use a domain, the old DNS answer may still be cached until the TTL expires.
ARK cluster transfers show nothing
The cluster folder did not come across, or the maps do not share it. Copy it, point every map at it with -ClusterDirOverride if it moved, and start all maps with the same -clusterid.
The archive checksum does not match after upload
The transfer was interrupted or corrupted. Upload the archive again and extract only after sha256sum -c reports OK.
Minecraft is a trademark of Mojang Studios / Microsoft; Rust of Facepunch Studios; ARK: Survival Ascended and ARK: Survival Evolved of Studio Wildcard; FiveM is operated by Cfx.re, a Rockstar Games company; Palworld is a trademark of Pocketpair, Inc.; Valheim of Iron Gate AB / Coffee Stain Publishing. ESAGAMES is an independent hosting provider, not affiliated with or endorsed by any of them. File locations checked September 2026; games change their save layout in updates, as Minecraft 26.1 and Valheim 1.0 did.